| Stainless Steel Internals
| Brass Internals
|
| Dial | 4” (100mm) white aluminum with black and red markings | 4” (100mm) white aluminum with black and red markings |
| | | |
| Case | PBT Polyutylene terephthalate - colour coded | PBT Polyutylene terephthalate - colour coded |
| | | |
| Lens | Polycarbonate | Polycarbonate |
| | | |
| Ring | PBT Polyutylene terephthalate - colour coded | PBT Polyutylene terephthalate - colour coded |
| | | |
| Socket | 316L SS | OT 58 brass |
| | | |
| Connection | 1/4” NPT or 1/2” NPT standard | 1/4” NPT or 1/2” NPT standard |
| | | |
| Bourdon Tube | 316L SS, drawn seamless | Phosphor bronze |
| | | |
| Movement | 304 SS | Gears are OT 59 brass, plates are AISI 304 SS |
| | | |
| Pointer | Aluminum, anodized black | Aluminum, anodized black |
| | | |
| Welding | TIG, silver alloy | Tin/copper alloy for pressures below 600 psi (4,147 kPa). Silver alloy for pressures 600 psi (4.147 kPa) and above |
| | | |
| Over-Pressure Limit | 30% for pressures up to 600 psi
(4,147 kPa)
15% for pressures over 600 psi
(4,147 kPa) | 25% for pressures up to 1,400 psi
(9,653 kPa)
15% for pressures over 1,400 psi
(9,653 kPa) |
| | | |
| Gasket Material | EPDM | Silicone rubber for socket, EPDM for lens,
filling plug and blow-out vent |
| | | |
| Working Pressure | Maximum 75% of full scale value | Maximum 75% of full scale value |
| | | |
| Ambient/Process Temperature | Dry: -40°F to 200°F (-40°C to 93°C) Glycerin Filled: -40°F to 150°F (-40°C to 65°C) | Dry: -40°F to 200°F (-40°C to 93°C) Glycerin Filled: -40°F to 150°F (-40°C to 65°C) |
| | | |
| Accuracy | ±1% ANSI/ASME Grade 1A | ±1% ANSI/ASME Grade 1A |
| | | |
| Enclosure Rating | IP65 per UEC 529, UNI 8896 | IP65 per UEC 529, UNI 8896 |
