You are here: Home > Enclosures, Fans & Thermal Management > Hammond Mfg Enclosures > Industrial Enclosures by Hammond Mfg > HN4 Series Enclosures by Hammond Mfg > HN4FS Series Single Door Freestanding 3-Point Handle by Hammond Mfg

We found 3 results matching your criteria.

HN4 Series Freestanding Enclosures - NEMA 4

Single Door w/ 3pt Handle

Application

Designed to house electrical, electronic, hydraulic or pneumatic controls with provision for panel mounting or rack mounting of equipment.
Provides protection where equipment may be hosed down or otherwise be very wet, or in specific applications where corrosion is a serious problem
A variety of inner panels, rack mounting rails and swing out frames are available to provide flexibility in mounting arrangements.

Standards

UL 508 Type 3R, 4 and 12
CSA Type 3R, 4 and 12
Complies with:
- NEMA Type 3R, 4, 12 and 3
- IEC 60529, IP66

Construction

Formed 12 gauge steel.
Smooth, continuously welded seams without knockouts, cutouts or holes.
Lifting eyes provide for easy enclosure handling.
Doors are supported with heavy gauge continuous hinges.
New 3-pt padlocking door handle.
Oil resistant gaskets are permanently secured and mechanically retained.
A grounding stud is provided in the enclosure and a bonding stud is provided on the door.
Mounting channels are welded on the inside of the enclosure for mounting of optional inner panels or rack equipment rails.

Finish

Cover and enclosure are finished in recoatable smooth ANSI 61 gray powder coating on the outside, with white powder coating on the inside.
Optional inner panels are finished in white powder coating.