Designed for use as instrument enclosures, electric,
hydraulic or pneumatic control housings, electrical junction boxes or
terminal wiring enclosures.
Provides protection where equipment may be hosed down or
otherwise be very wet, or in specific applications where corrosion may
be a problem.
For high temperature applications, a gasket retainer may be required, please refer to factory.
Standards
UL 508 Type 3R, 4, 4X, 12, and 13
CSA Type 3R, 4, 4X, 12, and 13
Complies with
NEMA Type 3R, 4, 4X, 12 and 13
JIC EGP-1-1967
IEC 60529, IP66
Construction
Body and cover are formed from 304 stainless steel.
Smooth, continuously welded seams without knockouts, cutouts, or holes.
Formed lip on enclosure to exclude flowing liquids and contaminants.
14 gauge welded brackets provide for enclosure mounting.
Continuously hinged cover has 304 stainless steel hinges and provides 180° opening.
Door latches feature the added safety of quarter turn slot requiring use of tool for opening.
Quarter turn latches formed from 316 stainless steel.
Oil resistant gaskets are permanently secured.
Models larger than 4"x4" include a removable 14 gauge galvanized inner panel.
Tapped studs are provided for mounting inner panels.
A bonding stud is provided on the door and a grounding stud is provided on the enclosure.
Includes grounding kit and a hardware kit with panel mounting screws.
Finish
Cover and enclosure are natural stainless steel with a smooth brushed finish.
Removable inner panel is unpainted galvanized steel.
