AC Standard  CM Series
The CM Series is used to detect either an overcurrent or undercurrent condition.
The pick-up current setting is user-adjustable within one of three ranges as shown
in the Product Selection Table below. An external current transformer can be used
to extend the range beyond 10 amperes.
Choose between a fi xed
drop-out current setting
at 95% of the selected
pick-up setting or an adjustable
drop-out setting
of 50-95% of the selected
pick-up setting. The relay
will energize when the
monitored AC current is
above the pick-up setting, and will de-energize when the monitored AC current is
below the drop-out setting. The time delay on both pick-up and drop-out is fi xed at
100ms.
|
|
|
